2.3 Olds Quad 4 High Output Engines- 180 HP Long
block assemblies: These are brand new GM engines that are complete but without
any accessories, manifolds or injection components.
$2,000.00
Olds Quad 4 Turbo Motor- Fresh rebuild with forged
8:1 pistons, stainless valves, etc. Complete with Garrett turbo charger, adjustable
waste gate, and small intercooler. Engine WILL NOT run with stock computer.
Requires OP 1661ST programmable fuel injection/ignition system. Includes turbo
oil recirculation system, ready to install.
$4000.00
3.4 Z34 Twin Cam V6 Engine- 215 HP complete long
block assembly engine, This engine is a low mileage take out engine and is
complete except for intakes, manifolds and injection components. Partially
disassembled for inspection- looks great.
$1,500.00
2.2 OHC Brazilian 4 cyl. Sunbird Engines- These
are special GM powertrain prototype engines that were to be 2.0 Sunbird upgrades.
They are exactly like the OHC Sunbird engine except they have increased stroke
to boost displacement to 2.2 liters. Low mileage test motors that will run
with 2.0 Sunbird injection on late model '92 & up MPFI cars.
$750.00
3.1 V6 Racing Short Block- This is a full race
prepared 3.1 V6 short block. Bored +.040" and equipped with Wiseco racing
pistons, Carillo billet rods, Clevite bearings and HD Melling oil pump assm.,
Mid range torque camshaft, special windage tray and balanced and blueprinted
and assembled ready for your choice of heads. Includes lightened stock std.
clutch flywheel. No front cover assembly. Choice of pistons to use with either
cast iron early 2.8-3.4 heads or later 2.8-3.1 alum. heads. Can be c/r detuned
for turbo or supercharger or give you 12:1 for full race applications.
$3,000- can complete to your specs, also.
3100 Sports V6 Engine- This is a modified production
FWD 3100 roller cam engine. It has upgraded cast pistons at 10.5:1 c/r, a
mild roller performance cam profile, and a set of mildly ported 3100 heads
with stainless valve and HD valve springs and retainers. new HD oil pump and
special windage tray too. 200+HP This engine would require a modified ECM
to make it run properly in a FWD production car, or possibly a stand alone
EFI controller, so its not just a warmed over stock piece. Great for a kit
car, Fiero, or other project too.
$3,500.00
3.4 Z34 Cylinder Heads- Ported and polished test
heads only, never run. These were test heads we prepared fo a customer who
never finished this project. Made great flow numbers and are complete with
polished valves and new HD valve springs, Assembled and ready to install.
$1,200.00
2.8 Cast Iron Sports Heads- Nice set of street
sports heads for that Fiero project, street rod or other 2.8 V6 RWD project.
Have mild port and polish, high flow valve job, stainless valves and HD springs
and retainers. Complete and ready to install.
$1,200.00
2.0 OHC Sports Cylinder Head- Nicely done sports
head for a 2.0 OHC Sunbird motor. Head has mild port matching and flow work,
polished valves and better valve springs. Nice pick up in power if you have
to rebuild one anyways. Like new.
$600.00
1.8 OHC Race Head- Here's a left over from the
old '83 Sunbird Racing days. Head has great port and polish work, bronze guides,
stainless valves and HD springs. Made great power, very low mileage. Not much
use for this one anymore- but we can ask?
$500.00 (offers or trades?)
Race Cars & Accessories:
Pontiac GrandAm GT Racecar- Great SCCA ITS or world challenge car. This 92 chassis has all the factory racing parts developed on the Olds Achieva IMSA cars. Bilsteins, 34mm frt. swaybar camber plates w/coil overs and regular frt. spring set ups, adjustable tubular rear swaybar, HD axle bearing mod, 9" rear drums and disk conversion. Car has an SCCA legal roll bar, but needs to be caged for serious competition use. This is NOT a street legal car, for racing only. We will partially support the efforts of a serious buyer who will put the car on the track, Inquire for prices. Roller or complete with motorsports transaxle and various Quad 4 engine options. Roller for $5,000 with all safety equipment, etc.
Pontiac Sunfire 4 Dr. Touring Car Racecar: This was our prototype development car for the NATCC, This 4 door Sunfire has an extensive roll cage, the suspension is completely coil-over Bilsteins, adjustable swaybars, Vette 13" brakes and HD wheel bearings and hubs. This car has great potential for a number of racing classes. Inquire if you want to build the ultimate Sunfire racecar- willing to trade for other vehicles, race cars, motorhomes, etc.?
18 X 8.5" OZ Racing Mags: These are the MSW C55 6 spoke silver mags. They are machined for 115 X 5 larger GM wheel bolt pattern. Will fit all Lumina, Monte, Cutlass, late Alero and Grand Am, etc. Are brand new with a few nicks- have been on a show car for a year. Mounted with BFG 235ZR X 40 TA 3 tires, also brand new. These were new at over $1,500- we will let them go for $1,200 also brand new.
Street Cars & Trucks:
1990 Black Lumina APV Van- 3.1 V6, 3 spd. A/T,
A/C, 6 pass., all new brakes, struts, exhaust,15" factory alloy wheels
and new tires. 160K miles but in great condition with new paint work in process
now.
$3,500.00- offers or trades?
1989 Red Pontiac LeMans 2 Dr. Cpe.- Nice college
or starter car. 1.6 OHC engine (just overhauled), A/T, A/C, GSI rear spoiler,
new exhaust, 13" alloy rims and new tires. 35+ mpg. Body is rust free,
a few dent on the hood.
$1,200.00- offers or trades?
1995 Black Chevy CK 1500 Extended Cab Stepside Pickup-
This Silverado has all the options, 350V8, A/T, cruise, power seats &
window, A/C, tow package equipment, chrome factory rims, new tires and shocks,
tonneau cover. 80K miles but VGC.
$10,000 financing available.
